Yes, BESS all risks insurance can cover battery replacement costs, but only when the battery is damaged by a sudden, unforeseen, insured event such as fire, electrical failure, or water damage. Gradual wear, capacity fade, and normal degradation are not covered. Below, we answer the key questions B2B owners and developers ask about replacement cover.
When does BESS insurance pay for battery replacement?
BESS property damage cover pays for battery replacement when physical loss or damage results from an insured peril, such as fire, short circuit, electrical breakdown, or water ingress. The damage must be sudden and accidental, and the system must have met the insurer’s conditions on installation and operation at the time of the loss.
In practice, insurers look at three things before they approve a replacement:
- The cause of damage: It must fall under the perils named in the policy.
- The condition of the installation: Distances to buildings, fire barriers, and safety systems must match what was agreed with the insurer.
- Compliance with the policy conditions: Maintenance, monitoring, and operating limits must have been respected.
If these three boxes are ticked, a covered incident can lead to repair or replacement of the damaged battery components. Cover options differ by insurer, so reviewing the policy wording before installation is essential. Our page on energy storage all risks insurance explains the typical structure of this type of cover.
Which battery replacement costs are not covered by BESS insurance?
BESS insurance does not cover replacement costs caused by gradual deterioration, including normal battery degradation, capacity loss over time, and ordinary wear and tear. Costs from faulty design, manufacturing defects, or poor maintenance are also commonly excluded or restricted, because they are not sudden external events.
Typical exclusions to watch for include:
- Battery degradation exclusion: Declining state of health and capacity fade over the system’s life.
- Known defects: Issues present at commissioning or covered by the manufacturer.
- Non-compliance: Damage linked to installation outside the agreed safety requirements.
- Software or operating errors: Depending on the policy, certain control faults may be excluded.
Because wording varies between policies, never assume that a loss is covered. Ask for exclusions in writing before you sign.
How do insurance and manufacturer warranties work together on batteries?
Insurance and manufacturer warranties cover different risks. Warranties typically address defects and performance guarantees from the manufacturer, while BESS insurance responds to sudden physical damage from insured events. Together they reduce gaps, but the two should be aligned so that neither assumes the other will pay.
A useful way to think about it:
- Warranty: Responds to product faults and, usually within defined limits, to performance shortfalls.
- Insurance: Responds to accidental damage, such as fire or electrical failure, regardless of whether the product itself was flawed.
Where a loss could fall under both, insurers may investigate the root cause and may pursue recovery from the manufacturer. Check how your warranty conditions, maintenance requirements, and insurer conditions interact. A mismatch, for example, between the servicing required by a warranty and that expected by your policy can complicate claims.
Does cover include the full battery or only damaged modules?
Cover typically applies to the damaged parts and the cost needed to restore the system to its pre-loss state, which may mean individual modules, racks, or the whole battery, depending on the extent of the damage. Policy terms and sums insured determine how far the payout goes.
Several factors influence whether a partial or full replacement is approved:
- Extent of damage: Fire or thermal events often affect neighboring modules, which can lead to wider replacement.
- Technical feasibility: If damaged modules cannot be safely replaced or matched with the existing system, a larger replacement may be justified.
- Sum insured and valuation basis: Underinsurance can reduce the payout.
It is wise to confirm in advance how your policy values the installation, so the sum insured reflects realistic replacement costs.
Will BESS insurance also cover income lost during battery replacement?
Lost income during battery replacement is covered only if your policy includes BESS business interruption cover and the underlying damage is insured. This extension can compensate for lost revenue or ongoing fixed costs while the system is out of service, within the agreed indemnity period and limits.
Important points to clarify before an incident:
- Indemnity period: Replacement lead times for batteries can be long, so the period must be realistic.
- Calculation method: Understand whether the cover is based on lost revenue, gross profit, or fixed costs.
- Waiting period: Many policies include a time deductible before compensation begins.
Without a business interruption extension, property damage cover alone pays for the physical loss, not the income lost while waiting for the replacement.
How can BESS owners improve the odds of a successful claim?
BESS owners improve their chances of a successful claim by meeting the insurer’s installation and safety requirements, documenting maintenance and operation, and reporting incidents promptly. Clear records make it easier to show that the loss falls within the policy and that conditions were respected.
Practical steps include:
- Agree requirements up front: Confirm location, distances, fire barriers, and protection measures with the insurer before installation.
- Invest in prevention: Insurers may offer better terms for installations with comprehensive thermal runaway prevention systems, and some will not insure systems that lack them.
- Keep thorough records: Retain commissioning reports, maintenance logs, and monitoring data.
- Report quickly: Notify your insurer or broker as soon as an incident occurs, and preserve evidence.
- Follow safe response practices: Water can worsen battery fires due to electrical conductivity and the spreading of electrolytes, but it is currently the most recommended method for cooling and de-escalating, so follow professional guidance.
How Solarif helps with BESS insurance and battery replacement
As an insurance broker (not an insurer) specialized in solar and energy storage, we help B2B owners, developers, and financiers secure cover that matches their real risks. Since 2009 we have insured 3.8 GW of capacity and carried out 521 Scope 12 inspections, and we work with A-rated insurers.
- We explain what your BESS policy covers and excludes, including property damage, business interruption, and degradation exclusions.
- We clarify insurer requirements on locations, distances, fire barriers, and safety measures before you build.
- We help you align warranties and insurance so there are fewer gaps in your protection.
- We support you through the claims process with expert guidance.
Want certainty about your battery replacement cover? Contact our experts or visit Solarif and request a quote today.
Frequently Asked Questions
How do I get started with checking whether my existing BESS policy covers battery replacement?
Start by requesting the full policy wording and schedule from your insurer or broker, then review the named perils, exclusions, sums insured, and any conditions on installation and maintenance. Compare these against your actual site setup, including distances, fire barriers, and monitoring systems. If anything is unclear, ask your broker to confirm in writing how a battery replacement scenario would be handled.
What should I do immediately after a battery incident to protect my claim?
Make the site safe first and follow professional emergency guidance, then notify your insurer or broker as soon as possible. Preserve evidence by taking photos, saving monitoring and BMS data, and avoiding removal or disposal of damaged components until the insurer has had a chance to inspect. Keep a record of all communications and costs incurred.
Can an insurer refuse a replacement claim if I missed a maintenance service?
Yes, it is possible. If the policy conditions require specific maintenance or monitoring and the loss is linked to non-compliance, the insurer may reduce or decline the claim. To avoid this, keep a documented maintenance schedule, store service reports, and make sure your servicing plan satisfies both the manufacturer’s warranty and your insurance conditions.
What if my sum insured is lower than the current cost of replacing the battery?
If the sum insured is below the real replacement value, you may be underinsured and the payout could be reduced proportionally. Battery prices and technology change quickly, so review the sum insured at least annually and at renewal. Ask your broker how the policy values the installation, for example on a new-for-old basis, and adjust accordingly.
How long should the business interruption indemnity period be for a BESS?
It should reflect realistic replacement lead times, which for batteries and associated components can be many months depending on supply chains and site approvals. Review manufacturer delivery times and the time needed for installation, testing, and grid reconnection, then add a safety margin. Also check the waiting period or time deductible so you understand when compensation actually starts.
What happens if a loss could be covered by both the warranty and the insurance?
The insurer will typically investigate the root cause, and if a manufacturing defect is found, it may pursue recovery from the manufacturer. This can slow the process, so it helps to notify both the manufacturer and the insurer early and share the same technical information with each. Aligning warranty and policy terms in advance reduces disputes about who pays first.
Do insurers require specific fire protection measures before offering battery replacement cover?
Often yes. Insurers commonly set requirements for location, distances to buildings, fire barriers, and thermal runaway prevention or detection systems, and some will not insure systems that lack them. Discuss these requirements with your broker during the design phase, before construction, so you avoid costly retrofits and secure better terms.